Subject Datasheet

PDF letöltése

I. Tantárgyleírás

1. Alapadatok
1.1 Tantárgy neve
Geology
1.2 Azonosító (tantárgykód)
BMEEOGMAT41
1.3 Tantárgy jellege
Kontaktórás tanegység
1.4 Óraszámok
Típus Óraszám / (nap)
Előadás (elmélet) 1
Laboratóriumi gyakorlat 2
1.5 Tanulmányi teljesítményértékelés (minőségi értékelés) típusa
Vizsga
1.6 Kreditszám
3
1.7 Tárgyfelelős
név Dr. Ákos Török
beosztás Egyetemi tanár
email torok.akos@emk.bme.hu
1.8 Tantárgyat gondozó oktatási szervezeti egység
Geotechnika és Mérnökgeológia Tanszék
1.9 A tantárgy weblapja
www.epito.bme.hu/BMEEOGMAT41
https://edu.epito.bme.hu/course/view.php?id=434
1.10 Az oktatás nyelve
magyar és angol
1.11 Tantárgy típusa
Kötelező az építőmérnöki (BSc) szakon
1.12 Előkövetelmények
1.13 Tantárgyleírás érvényessége
2022. szeptember 1.
2. Célkitűzések és tanulási eredmények
2.1 Célkitűzések
The aim of the subject is that the students improve their knowledge focused on geological information for engineering purposes, especially for civil-engineering design, construction and research. The subject presents geological factors that determine the choice of the location of engineering facilities and the design and required maintenance of structures.
The gained geological knowledge will include the structure and dynamics of Earth, building materials of earth’s crust, mineralogy; rock properties, volcanic, sedimentary and metamorphic rocks. Events affecting the ground, analysis of the influence of earthquakes and volcanism, and characterization of the surface movements, surface waters and groundwater are of priority importance. The subject also refers to environmental geology and interaction between structure and surrounding rock mass. The course inducates the development of scientific reasoning of engineering students and it establishes a link between engineering and natural sciences.
2.2 Tanulási eredmények
A tantárgy sikeres teljesítése utána a hallgató
A. Tudás
  1. Knows the internal structure of Earth and the geological time scale
  2. Knows the terminology of the mineral and the rock,
  3. Knows the ingenious rock,
  4. Knows the sedimentary and the metamorphic rocks,
  5. Knows the terminology of the structural geology,
  6. Knows the geological map and the properties of the sections,
  7. Knows the surface forming processes,
  8. Knows the system of the surface waters and the groundwaters,
  9. Knows the basic filed and laboratory tests,
B. Képesség
  1. Able to identify rock types,
  2. Able to understand geological maps, and create geological cross-section
  3. Able to carry out in situ rock diagnostic, and write experts reports,
  4. Able to express her/his thoughts orderly in written and oral.
C. Attitűd
  1. cooperate with the teacher during the learning process,
  2. improve her/his knowledge with continuous learning,
  3. open to use the up-to-date software and design methods,
  4. pursue to know and use of the toolkit that is necessary for the geotechnical and engineering geological problem solution,
  5. pursue to the exact and errorless task solution.
D. Önállóság és felelősség
  1. individually assesses geological problems and tasks associated with structural engineering,
  2. their solution based on given sources
  3. take into consideration the logical steps of the solution of engineering geological tasks,
  4. open to reasoned critical remarks,
  5. applies a systematic way of thinking
2.3 Oktatási módszertan
Lectures, mineral-rock recognise practise, geological mapping, verbal and written communication.
2.4 Részletes tárgyprogram
Week Topics of lectures and/or exercise classes
1. Earth's history, the internal structure of Earth and continental drift. Building materials of the Earth' crust. The rock cycle.
2. Requirements of the subject, Civil engineering aspects of geology, application area, engineering geology Rock-forming minerals.
3. Igneous rocks, their characterization and usage, practice of igneous rock recognition
4. Igneous rocks recognition, rock recognition test
5. Sedimentary rocks, their characterization and usage
6. Metamorphic rocks, their characterization and usage, practice for the rock recognition test
7. Mineralogy and rock forming minerals: properties, types, recognition
8. Metamorphic rocks recognition, rock recognition test
9. Structural geology: faults, folds and geological structures
10. Field trip to the Gellért-hill, structural geology, rock slope stabilization
11. Processes acting on the Earth's surface: weathering, erosion, mass movements, landslides, earthquakes, volcanism
12. Engineering geological tasks and problems; examples, case studies
13. Surface waters (oceans, seas, lacustrine environments and rivers), Groundwater(types, karstic water, groundwater flow, springs, and water chemistry
14. Geologic mapping

A félév közbeni munkaszüneti napok miatt a program csak tájékoztató jellegű, a pontos időpontokat a tárgy honlapján elérhető "Részletes féléves ütemterv" tartalmazza.
2.5 Tanulástámogató anyagok
a) Textbooks:
  1. Török Á.: Geológia Mérnököknek, Műegyetemi Kiadó, 2008
  2. Bell F.G. Fundamentals of Engineering Geology, Elsevier, 2016
b) Online materials:
  1. 1. Lecture notes
  2. Manual for the homework
2.6 Egyéb tudnivalók
  1. The theoretical knowledge should be presented under practical trainings for students.
  2. The minerals will be presented in Mineral and Rock Collection of ELTE (Eötvös Lorand University).
  3. For the stone diagnostic home assignment, all students have to analyses a part of stone structure or a part of stone masonry structure on site.
2.7 Konzultációs lehetőségek

The instructors are available for consultation during their office hours, as advertised on the department website. Special appointments can be requested via e‐mail: torok.akos@epito.bme.hu

Jelen TAD az alábbi félévre érvényes:
2024/2025 semester I

II. Tárgykövetelmények

3. A tanulmányi teljesítmény ellenőrzése és értékelése
3.1 Általános szabályok
The assessment of the learning outcomes is specified in clause 2.2. above and the evaluation of the student's
performance happens via 2 tests, 1 home assignment and the exam.
3.2 Teljesítményértékelési módszerek
Evaluation form Abbreviation Assessed learning outcomes
1. control test CT1 A.5-A.7; B.1,-B.4; C.1-C.5, D.2
2. control test CT2 A.1-A.3; B.1; C.1-C.2; C.4-C.5;D.1
3.control test CT3 A.1-A.4; B.1; C.1-C.2; C.4-C.5;D.1
1. homeworkHWA.1-A.7; B.1-B.4; C.1-C.5; D.1-D.2
Written examEA.1-A.9; B.1-B.4; C.4-C.5; D.1-D.5

A szorgalmi időszakban tartott értékelések pontos idejét, a házi feladatok ki- és beadási határidejét a "Részletes féléves ütemterv" tartalmazza, mely elérhető a tárgy honlapján.
3.3 Teljesítményértékelések részaránya a minősítésben
Abbreviation Score
CT1 15%
CT2 10%
CT3 15%
HW15%
Total achievable during the semester 55%
E 45%
Sum 100%
The final result is failed if on the exam minimum 50% of the points are not reached.
3.4 Az aláírás megszerzésének feltétele, az aláírás érvényessége
The criterion of obtaining the signature is to reach half of the points achievable during the

semester according to clause 3.3.
To accomplish the practical part of the subject it is required to pass all tests and the home assignment separately.

The final result of the student who has the signature but instead applying for the examine course applies the practice again will be calculated from her/his better results.

The previously acquired signature is valid for 6 semesters for the calculation of the final result.
3.5 Érdemjegy megállapítása
The grade of those who accomplished the attendance is determined by the following criteria:
The midterm grade is coming from the result of the two midterm tests and the home assignment.
The final grade is computed as the weighted of the midterm requirements and the exam as described in 3.3.
GradePoints (P)
excellent (5)80<=P
good (4)70<=P<80%
satisfactory (3)60<=P<70%
passed (2) 50<=P<60%
failed (1)P<50%
3.6 Javítás és pótlás
1) Homework – after the payment of the fee determined in the regulation – can be submitted
with a delay until 16.00 or in electronic format until 23.59 of the last day of the completion
week.
2) The submitted and accepted homework can be corrected without any fee until the deadline
described in point 2.
3) The two midterm tests can be repeated once in the completion week free of charge.
In case of correction, the better result will be taken into account from the new and previous results.
3.7 A tantárgy elvégzéséhez szükséges tanulmányi munka
Activity Hours/semester
contact hours 14×3=42
preparation for the courses 14×1=14
preparation for the tests 9+3=12
homework 6
home studying of the written material 16
Sum 90
3.8 A tárgykövetelmények érvényessége
2022. szeptember 1.
Jelen TAD az alábbi félévre érvényes:
2024/2025 semester I